White-label · concrete · steel · timber · Eurocodes
Your signature. Our engineering.
Structural design and detailing packages for consultancies, steel fabricators and precast manufacturers in the UK and the Nordics. Calculations, drawings and schedules from one source, in your standard, delivered so your checker signs instead of reworking. Two to six engineers in your workflow within two weeks.
- to a scoped pilot offer
- 48 h
- to engineers in your workflow
- 2 wks
- national annexes: UK, NO, SE, DK, PL
- 5
Who we work with
Four kinds of office. One back office.
Structural consultancies
Overflow capacity, full design packages or detailing under your sign-off. Your title block, your numbering, your review workflow. We disappear from the final set.
Steel fabricators and detailers
Connection design with a proof per connection, fabrication and erection drawings, bolt lists. Sized welds instead of rules of thumb, EXC and tolerances stated.
Precast and modular manufacturers
Element and mould drawings, lifting and transport checks, connections, at the rate the production line needs. Schedules generated from the drawing, never typed twice.
Architects and design-build teams
An engineering partner for competitions and early stages: structural options with a cost balance before the client sees a contractor’s price. Handed over to your local engineer of record for sign-off.
In numbers and in practice
Ten years of delivered structures. Three rules for working under your name.
- since 2016 10
- years in the market
- 100+
- buildings designed
- 200,000+
- m² of structures designed
- 3
- structural materials
Your standards, not ours
Title block, layers, bar shape codes, schedule format, naming, review workflow: we calibrate on your first sheet and keep it for the whole programme. The set looks like yours because it is yours.
Checked before it reaches you
Every sheet passes an internal legibility and completeness check, and every calculation carries its proof. Your reviewer receives a check set with our own mark-ups, not a first draft.
Engineers, not a drafting pool
The people detailing your slab are the people who calculated it. Calculations, drawings and schedules come from one source, so nothing is drawn from someone else’s numbers.
Work packages
Scoped packages. Fixed prices. Your standards.
Every package has a defined input list, a defined deliverable list and a price agreed before we start. The first sheet is a free calibration sheet.
Design and detailing
Structural design packages
Scheme to detailed design under your sign-off: models, calculations, GA drawings, one consistent set.
02Reinforced concrete design and detailing
Formwork and reinforcement drawings, bar schedules derived from the drawing, punching and crack control done properly.
03Steel design, connections and detailing
Member design, connection design with proof, fabrication-ready drawings and bolt lists.
04Timber, glulam and CLT
Roof framing, glulam girders, CLT floors and walls, connections that govern, fire by charring.
05Timber-frame panels and cut lists
Wall, floor and roof panels generated from the architectural plan for Nordic, North American and Australian framing systems: panel drawings, piece-by-piece cut lists, material order.
06Precast and modular
Element drawings, moulds, lifting and temporary conditions, connections, for precast plants and modular manufacturers.
Capacity, checking, BIM
Structural BIM and IFC coordination
Structural models from architecture, clash-free IFC, quantities and openings taken from the model, not from a box.
08Independent checking and calculation reports
Category 2 and 3 checks, second-opinion calculations, report writing that a reviewer can follow.
09Overflow capacity and dedicated engineers
Two to six engineers in your workflow within two weeks, for a month or a year, in your tools and your time zone.
The old rule of outsourcing
Fast. Cheap. Accurate.
Every subcontractor makes you pick two. Try raising all three.
Pick three.
No magic. One data source for calculations, drawings and schedules, so nothing is drawn twice or checked twice. A sheet check before every issue, so your reviewer finds nothing to send back. And a cost base in Poland with engineers who have delivered a two-level car park on 140 columns, not a drafting pool.
How white-label works
What you get, what you keep, what we never do
- 01
You keep the client and the signature
We never contact your client, never appear on the set, never bid on your project. The contract is with you; the professional relationship stays yours.
- 02
Fixed scope, fixed price, fixed date
Each package is scoped in writing: inputs, deliverables, standard, date. Changes are priced before they are made. No surprises on the invoice or in the programme.
- 03
One version of every number
Drawing, schedule and calculation report say the same thing because they come from the same data. Your checker never chooses which sheet to believe.
- 04
Every assumption written down
Where data is missing we do not guess. The decision register names every assumption and who must confirm it. A caveat on paper is cheaper than a surprise on site.
- 05
Revisions inside the set, not a new set
A changed architecture means a revision with a history, in the same numbering, not a project started again and priced again.
- 06
Confidentiality and data
NDA before the first file. Work on your systems if you prefer. All rights in the deliverables pass to you on payment; we keep nothing for our portfolio without your written consent.
How a package runs
From a 48-hour pilot to a rolling programme
- 01
Pilot in 48 hours
Send one real task: a slab, a connection, a check. Within 48 hours you have a scoped offer, within a week the delivered sheet. You judge on your own project, not on our brochure.
- 02
NDA and calibration
We sign your NDA, receive your standards and templates, and calibrate on the first sheet: title block, layers, schedules, naming. Free.
- 03
Scoped package
Inputs, deliverables, national annex, price and date in writing. A named engineer on our side, a named counterpart on yours.
- 04
Delivery and internal check
Calculations, drawings and schedules from one source. Every sheet checked internally before issue; RFIs answered the same day.
- 05
Your review and sign-off
You receive a check set with our mark-ups and the decision register. Comments go back into the same set as a revision. You sign.
Sample work
What our sets look like
Delivered structures shown anonymised, out of respect for the consultancies and investors we worked for. Full sample packs of drawings and calculation reports are available under NDA.
Reinforced concrete set
Transfer slab GA, reinforcement drawing with schedule, and the matching chapter of the calculation report.
Request under NDASteel connection set
Portal frame haunch connection: calculation with proof, fabrication drawing, bolt list.
Request under NDACalculation report extract
Assumptions, loads, one member proof and the decision register, in the format a checker receives.
Request under NDAResidential estate with a two-level underground car park
Several apartment buildings set at an angle to the grid of a shared car park, on a transfer slab, phased and calculated as one whole. Plus a service pavilion with a shared terrace and a curtain-wall facade.
Semi-detached house with a basement garage below groundwater
A two-unit house with a basement garage below the groundwater table. House-scale structure with engineering-project problems: uplift, watertightness, driveway levels and a movement joint between the units.
01 Who signs the design and who carries the liability?
You sign, as engineer of record, after your own review. We carry professional indemnity insurance for our work as a subconsultant and we warrant our deliverables to you. We never appear on the issued set unless you want us to.
02 Will you ever contact or approach our client?
No. Non-solicitation is in our standard subconsultancy agreement. The client relationship is yours and stays yours.
03 Which codes and national annexes do you design to?
Eurocodes EN 1990 to 1997 with the UK, Norwegian, Swedish, Danish and Polish national annexes. For US work under ACI and AISC we take detailing and drafting packages under your engineer of record rather than full design.
04 Do you work in our CAD and BIM standard?
Yes. Title block, layers, line weights, bar shape codes, schedule format, naming and folder structure are calibrated on the first sheet and kept for the whole programme. We work in your environment if you prefer.
05 How do you price a package?
Fixed price per scoped package for design and detailing; hourly or monthly per engineer for capacity work; per drawing, per tonne or per connection type for detailing programmes. Every price is agreed in writing before we start and changes are priced before they are made.
06 Why are you not the cheapest offer we will receive?
Because the people detailing your slab are the engineers who calculated it, not a drafting pool working from someone else’s numbers. You pay for a set that your reviewer signs, not for a set that your reviewer reworks. Compared with a local hire we are still a fraction of the cost.
07 How is our data protected?
NDA before the first file. We can work entirely on your systems via VPN so that nothing leaves your environment. Otherwise files sit on encrypted, access-controlled storage in the EU and are deleted or returned at the end of the engagement.
08 Will our project appear in your portfolio?
Not without your written consent. Everything on this site is anonymised and shown with the permission of the parties involved.
09 What does your internal check cover?
Every sheet is checked for legibility, completeness and consistency with the schedule and the calculation before issue. Every calculation carries a proof. You receive our own mark-ups with the set, so you see what we checked.
10 What happens when the architecture changes midway?
We revise within the same set, same numbering, with a revision history. A changed floor plan is a revision with a price agreed upfront, not a new package.
11 Which structures do you take on?
Residential, offices, retail, industrial and logistics halls, public buildings, car parks and basements, precast and modular, existing-building strengthening. Concrete, steel, timber and CLT, composite and masonry.
12 Do you do full design or only detailing?
Both, and everything between: scheme design, detailed design, connection design, reinforcement detailing, BIM, independent checking and calculation reports. You choose the package boundary.
Send one real task. Judge us on your own project.
A scoped offer within 48 hours, the delivered sheet within a week, calibrated to your standard. The calibration sheet is free.